PIXELHUE Q8_HDMI2.0_12G-SDI_FIBER_OUTPUT_CARD

Q8_hdmi2.0+12g-sdi+fiber output card

• el 4x hdmi 2. 0 i 4x 12g-sdi connectors són divided into 4 groups.

Each group includes 1x hdmi 2.0 and 1x 12g-sdi connectors, and

Connectors within the same group copy each other's output. The 12gsdi connector supports only standard resolutions under the protocol.

When the hdmi 2.0 connector is set to a custom resolution, the 12g-sdi

Connector does not output.

- connector 1 (hdmi 2. 0) i connector 5 (12g-sdi) form group 1.

- connector 2 (hdmi 2. 0) i connector 6 (12g-sdi) form group 2.

- connector 3 (hdmi 2. 0) i connector 7 (12g-sdi) form group 3.

- connector 4 (hdmi 2. 0) i connector 8 (12g-sdi) form group 4.

• 4x hdmi 2.0

◦ up to 4k×2k@60hz 8bit 4:4:4 or 4k×2k@60hz 12bit 4:2:2 output

◦ support for 8-bit, 10-bit and 12-bit output settings

◦ support for 4:2:2 and 4:4:4 output settings

◦ support for ycbcr and rgb color space settings

◦ support for hdr outputs

◦ support for color gamut adjustment

◦ support for interlaced video signal

◦ support for 8-channel embedded audio (24bit/48khz)

◦ custom resolutions

- maximum width: 8192 píxels

- maximum height: 7680 píxels

• 4x 12g-sdi

◦ compatible amb sd-sdi, hd-sdi, 3g-sdi i 6g-sdi

◦ support for interlaced video signal

◦ support for 8-channel embedded audio (24bit/48khz)

• 8x 10g opt

◦ support for single-mode and multi-mode optical outputs

◦ transmissió distance up to 10km in single mode

◦ support for 8-channel embedded audio (24bit/48khz)

◦ opt ports copy outputs on videoconnectors

- opt 1 and opt 2 copy the output from group 1.

- opt 3 i opt 4 copy the output from group 2.

- opt 5 i opt 6 copy the output from group 3.

- opt 7 and opt 8 copy the output from group 4.