Manage cookie consent


To offer the best experiences, we use technologies such as cookies to store and/or access device information. Consent to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Failure to consent, or withdrawal of consent, may adversely affect certain features and functions.

Rechazar
Aceptar
Ver preferencias
You can now register for ISE 2025! Booth 2U500 Charmex AV Technology <Get your ticket with our invitation code here>

How to clean your interactive monitor? Instructions to do it without damaging your coating / Present


Follow these instructions recommended by our partner Clevertouch to clean your interactive monitor without damaging its coating or other components of the product. We recommend using only a cloth slightly moistened with distilled water to clean the screen. Never spray the liquid directly on the surface of the monitor.

How to clean your interactive monitor? Instructions to do it without damaging your coating

Caution
· Do not use permanent markers or dry erase markers on the screen. If dry erase markers are used on the screen, remove the ink as soon as possible with a lint-free, non-abrasive cloth.
· Do not rub the screen with dense or rough material.
· Do not apply pressure to the screen.
· Do not use cleaning solutions or glass cleaners on the screen, except as noted above, as they may damage or discolor the screen.
· Do not use pre-moistened cloths.
· See cleaner packaging for safe handling instructions.






Clevertouch approves the use of the following:

Diluted bleach solution
To mix the correct solution, using standard household bleach at a concentration of 5% sodium hypochlorite:

20 ml of bleach per 1L of distilled water
Adjust accordingly to keep 0.1% solution if you use bleach stronger or weaker than 5% sodium hypochlorite. We recommend using a sprayer to apply the solution to the fabric to avoid over-saturation.
Note: Test a small, inconspicuous area before cleaning the entire surface.


70-90% isopropyl alcohol
Isopropyl alcohol comes pre-diluted and no mixing is required.
For concentrations greater than 90%, dilute accordingly with distilled water.
We recommend using a sprayer to apply the solution to the fabric to avoid oversaturation.

Note: Test a small, inconspicuous area before cleaning the entire surface.
If the screen is still dirty, apply a small amount of isopropyl alcohol (IPA) solution to the cloth and gently wipe the outside of the screen. As an alternative, you can use disinfecting wipes with 70% IPA.


To clean the screen
· You will need two lint-free, non-abrasive cloths for this procedure.
· Turn off any connected peripherals.
· Turn off the screen.
· Wipe all surfaces with the first dry, lint-free, non-abrasive cloth to remove dust and debris.
· Gently spray a small amount of water or cleaning solution on the second cloth.
Note: Do not saturate the cloth to the point that it drips.
· Clean the screen with the damp cloth.
· After cleaning the screen, clean the rest of the Clevertouch surfaces that can normally be touched, such as the frame, pens and other accessories.